[ad_1]
As we get nearer to the top of 2021, it looks as if the variety of webinars and occasions are slowing down each so barely. However we nonetheless have loads to let you know about for this week, together with webinars on the AM provide chain, ceramic powders, metallic 3D printed medical units, and extra. Learn on for all the small print!
America Makes & NCDMM Exhibiting at DMS 2021
First up, America Makes and 501(c)(3) not-for-profit group the Nationwide Heart for Protection Manufacturing and Machining (NCDMM) shall be exhibiting at this week’s Protection Manufacturing Convention (DMC), held in Denver, Colorado from December thirteenth by sixteenth. Attendance at this occasion is usually over 1,000 folks, largely from authorities, trade, and academia, and attendees run the gamut from techniques designers, CEO and Flag Officer degree to working-level manufacturing-oriented scientists and engineers, and representatives of the warfighters.
“DMC is the nation’s annual discussion board for enhancing and leveraging the efforts of engineers, managers, expertise leaders, scientists, and coverage makers throughout the protection manufacturing industrial base. Leaders and manufacturing subject material consultants from authorities, trade, and academia alternate info and views on protection manufacturing insurance policies, strategic course, greatest practices, funding alternatives, and the newest manufacturing improvements that can profit our warfighters.”
On-line registration is closed, however you may register onsite on the Gaylord Rockies Resort and Conference Heart beginning at present.
CASTOR on Provide Chain Advantages of AM
At 12 pm EST on Monday the thirteenth, CASTOR will maintain a dwell webinar session about “The Provide Chain Advantages of Additive Manufacturing.” The corporate’s CEO and Co-Founder Omer Blaier, along with William Mccall, Director of Operations for Additive Manufacturing at Xerox, will focus on the massive challenges of managing at present’s provide chains, how AM can be utilized to unravel producers’ ache factors, particular suggestions and insights, actual case research, and extra. There can even be a dwell Q&A session and a post-event networking session.
“Be a part of us on our dwell occasion in collaboration with CASTOR to find out how corporations are rapidly discovering Additive Manufacturing alternatives for revolutionising their provide chain.”
You possibly can register for the webinar right here.
DLP 3D Printable Ceramic Powders
Companions Fortify and Tethon 3D are co-hosting a webinar at 11 am EST on Tuesday, December 14th about how they “provide trade main DLP 3D printable ceramic powders with the bottom shrink price.” Philip Lambert, Purposes Engineer at Fortify, and Trent Allen, Tethon 3D’s CEO, will focus on how the partnership between the 2 corporations has led to the biggest construct quantity for ceramic DLP 3D printing, excessive throughput, and the trade’s lowest shrink price for LS-AS and HP-A 98.8%. They’ll additionally focus on how Tethon 3D’s supplies have been optimized for Fortify’s FLUX 3D printers.
“Collectively we provide the biggest construct quantity for ceramic DLP 3D printing together with new ceramic supplies that exhibit the bottom shrink inside trade. These low shrink charges imply that clients have a a lot wider design envelope for his or her parts together with thicker partitions, simpler processability, and higher reliability. LS-AS affords the bottom shrink 3D printable ceramic materials available on the market at 5%, in comparison with ~20-30% of opponents. HP-A 989.8% is the bottom shrink 3D printable excessive purity alumina available on the market at 13% which is almost half the shrinkage of main opponents.”
You possibly can register for the webinar right here.
Digital Tour of HP’s 3D Printing Demo Heart
HP is internet hosting one other one in every of its fashionable dwell digital excursions of the 3D Printing Demo Heart at 12 pm EST on the 14th. HP’s Carolina Rubio, 3D Printing Buyer Program Supervisor, and Wes Kramer, Utility Engineer, along with Kason Knight, the Proprietor and Lead Engineer of i-SOLIDS, will focus on how HP’s Multi Jet Fusion (MJF) AM expertise works and its purposes, along with offering an outline of the 3D printing workflow, taking questions from the viewers, and extra.
” On this session, you’ll study HP Multi Jet Fusion Know-how and the way the HP 3D Printing Finish-to-Finish Course of works, from file preparation to post-processing.”
You possibly can register for the tour right here.
CAMWorks Past Toolpath Era: CAM Automation
On Wednesday, December fifteenth, CAMWorks, an HCL Applied sciences Product, is holding a webinar centered on CAM automation, which would be the first session in a brand new sequence of webinars. The brief episode shall be held at 10 am EST for the Americas, 10 am CET for the EMEA, and 9 am IST for the APAC area. Attendees will discover ways to eradicate dry runs and confirm G-codes in a single click on, enhance productiveness with probing operations, and extra, plus an indication of CAM applied sciences that may assist scale back setup time and enhance high quality.
“This webinar is the primary webinar within the CAMWorks Past Toolpath Era sequence, which can cowl a wide range of subjects associated to CAM automation, digitization and bettering store flooring communication.”
You possibly can register for the webinars right here.
Lowering Provide Chain Dependencies with Markforged
Additionally at 10 am EST on the fifteenth, Markforged is holding a webinar referred to as “Past the Scarcity: Find out how to Cut back Provide Chain Dependencies with the Digital Forge.” With Charles Lu, Markforged Utility Engineer, because the Featured Speaker, will focus on the boundaries stopping 3D printing from altering manufacturing and the foremost variations between centralized and distributed manufacturing fashions, give examples of how completely different Markforged clients are utilizing the Digital Forge software program to struggle the All the things Scarcity, and extra.
“Surging demand, lagging provide, and an ongoing labor scarcity are constricting the circulate of bodily items around the globe. From vehicles to building supplies, costs are skyrocketing whereas availability grows much less sure with every passing day. How can we shield ourselves towards value actions and manufacturing dangers dominated by world forces exterior of our management?
“Producers should spend money on self-reliant technique of manufacturing to cut back dependence on faltering world provide chains and outsource manufacturing.”
You possibly can register for the webinar right here.
3DQue on Automated Failure Detection
Tune in to the 3DQue livestream on Wednesday the fifteenth at 7:30 pm EST to study in regards to the 14 Kinds of Failure Detection throughout this QuinlyVision Q&A. Along with studying about automated failure detection with the QuinlyVision platform, viewers will discover out the subsequent spherical of 3D printers that 3DQue shall be supporting within the new yr, and how one can be one of many first beta testers.
“Be a part of Mateo & Steven as they focus on QuinlyVision, 3DQue’s AI-driven program that makes use of webcam video to establish 14 sorts of 3D printing failures!”
Set your notifications for the livestream right here.
Zetamix 3D Printing by Nanoe
Nanoe, a French firm that manufactures nanopowders for superior ceramics, is a holding a webinar at 4 am EST on Thursday, December sixteenth about “Zetamix 3D printing: expertise and use circumstances.” Attendees will get again to fundamentals and study extra about FFF 3D printing, and the corporate can even current its Zetamix expertise, along with its benefits and a few use circumstances.
“Furthermore, with the intention to exhibit the potential of the expertise, our newest makes use of circumstances we be detailed: on this a part of the webinar you’ll find out how corporations and laboratories efficiently implement Zetamix 3D printing to enhance their course of and remedy their manufacturing points.”
You possibly can register for the webinar right here.
3DHEALS: Metallic 3D Printing Medical Units
In the event you’re concerned with studying about metallic 3D printed medical units, tune in to the 3DHEALS panel at 11 am EST on the sixteenth. Moderated by Dr. Jenny Chen, the Founder and CEO of 3DHEALS, the varied panel of consultants talking about their newest R&D efforts and trade insights into the metallic 3D printing of medical units are Kuntay Aktas, CEO and Co-Founding father of BTech Innovation; Jeph Ruppert, a Director with 3D Techniques’ Utility Innovation Group (AIG); Laura Kastenmayer, Business Supervisor Medical Know-how, Additive Manufacturing at TRUMPF Additive Manufacturing; and Dr. György Attila Harakály, Senior Materials Developer at Incus GmbH. There can even be breakout rooms out there for networking after the dialogue.
“Metallic 3D printing for medical units is regularly on the rise as physicians, technologists, and researchers are more and more profiting from the expertise’s boundless flexibility. 3D printed metallic implants particularly in orthopedics and craniomaxillofacial (CMF) house are a few of the earliest units gaining FDA clearance and wider manufacturing adoption. Biocompatibility of metallic/metallic alloy, development in metallurgy, innate design freedom, and mass customization possibility supplied by 3D printing counsel potential future higher implants that would lead to higher surgical success and medical final result. Because the trade progresses, newer or improved manufacturing processes promise a brand new era of healthcare purposes.”
You possibly can register for the webinar panel right here.
Stratasys & Arkema on Attaining AM Quantity Manufacturing
Lastly, the final webinar of the week, by Stratasys, shall be on Thursday the sixteenth at 2 pm EST, “Obtain Additive Manufacturing Quantity Manufacturing with PA11 & SAF Know-how.” Subject material consultants Kevin Sheehy, Manufacturing Engineer II, Stratasys Direct Manufacturing; Stephen Serpe, Market Supervisor, Specialty Powders and 3D Printing, Arkema; Adam Ellis, Company Purposes Engineer, Stratasys; and Tim Heller, Business Chief, Strategic Development, Stratasys, will focus on why AM doesn’t simply make sense in manufacturing portions, however can really be used to attain quantity manufacturing. Subjects will embody how Selective Absorption Fusion (SAF) expertise and PA11 materials can economize the manufacturing of plastic elements 3D printed on the Stratasys H350, why manufacturing corporations ought to reevaluate how they fabricate PA11 manufacturing parts, and extra.
“Excessive Yield PA11 Polymer Powder produces elements which have excessive ductility, are sturdy and impression resistant. This makes PA11 a super materials for manufacturing as a result of its superior consistency, mechanical efficiency and sustainability. Paired with SAF™ expertise and printed on the H350™, elements created with PA11 are extraordinarily correct and appropriate for a variety of purposes. This webinar explores PA11’s properties, the good thing about printing with the H350 and the way PA11 and SAF expertise can propel your corporation into the high-volume manufacturing house.”
You possibly can register for the webinar right here.
Do you may have information to share about any future webinars or digital and dwell occasions? Please tell us!
[ad_2]
