We’ve bought one other busy week of webinars and occasions to inform you about, with subjects starting from aviation and medical 3D printing to a city corridor assembly, biomaterials, SLA expertise, and extra. Learn on for all the small print!

eleventh Aviation Discussion board Hamburg 2021

First up, practically 160 exhibitors will descend upon Hamburg this week for the 2021 Aviation Discussion board, held December 7-8 with competence companions Airbus, the German Aerospace Industries Affiliation (BDLI), and Boeing. The occasion, beneath the banner “Aviation Reloaded,” is hybrid, so it you’ll be able to’t make it to Hamburg in-person you received’t miss out. OEMs, suppliers, and producers, thought leaders and political decision-makers are invited to come back meet the aviation trade’s prime managers and focus on new methods and applied sciences and increase their networks with new partnerships. Two firms that will probably be attending the discussion board are Materialise and TÜV SÜD.

“On the Aviation Discussion board Hamburg, greater than 750 decision-makers and specialists from the aviation trade will meet to form the brand new age of the aviation trade. Beneath the motto “Aviation Reloaded” new methods, applied sciences and partnerships will probably be mentioned to fulfill the brand new calls for on aviation. After dealing with the largest disaster the aviation trade has ever skilled, the trade must reposition itself and rethink outdated buildings to arrange thoughtfully for a recent begin.”

You’ll be able to register for the discussion board right here.

Stratasys & Covestro Taking SLA to the Manufacturing Ground

At 2 pm EST on Tuesday, December seventh, Stratasys and Covestro are holding a joint webinar, “Deliver Neo SL to the Manufacturing Ground,” targeted on utilizing the Stratasys SLA 3D printer and Covestro’s photopolymer supplies collectively for manufacturing functions. Audio system JP Velasco, Senior Purposes Engineer at Stratasys, and Eric Romano, World Product Supervisor at Covestro, will focus on how these two can be utilized to print short-run, end-use manufacturing elements which might be inexpensive, with shorter manufacturing timelines.

“There’s a frequent false impression out there that additively manufactured, photopolymer elements usually are not critical concerns for useful, manufacturing functions. On this session, specialists from Stratasys and Covestro will exhibit how the mixture of the brand new Neo printer and Covestro supplies are the exceptions.”

You’ll be able to register for the webinar right here.

Ending the Markforged Metallic Xpo Cast Tour

This week, Markforged will end its Metallic Xpo Cast Tour, which has visited a number of cities throughout North America over the previous month. At 2 pm EST on the seventh, Markforged will probably be on the EXBuild Showroom in Edina, Minnesota, after which on the Hawk Ridge Techniques Showroom in Brooklyn Park, Minnesota, at 3 pm EST on the eighth. The ultimate cease on the tour would be the GSC Showroom in Germantown, Wisconsin, at 11 am EST on the ninth. Meals and drinks will probably be served as attendees be taught extra about metallic 3D printing and see it in motion; they’ll additionally be eligible to obtain a free Mark Two 3D printer, and two seats for the Markforged College Digital Metallic Certification, with the acquisition of a Markforged Metallic X system.

“Metallic 3D printing has modified, and is constant to alter the panorama of producing: Markforged and our companions are hitting the street to point out you the way.”

You’ll be able to register for the ultimate tour dates right here.

AM Coalition on Breakthrough AM Medical Purposes

Proper after the Stratasys and Covestro webinar, the Additive Manufacturing Coalition will maintain a stay Zoom discussion board at 3 pm EST on the seventh, “Breakthrough Medical Purposes of Additive Manufacturing,” of which there are loads. The panelists for this occasion will probably be Dr. Matthew Di Prima, Supplies Scientist for the FDA; Alyssa Glennon, Principal Engineer at Materialise; Gaurav Manchanda, Director of Medical Market Improvement at Formlabs; and Denys Gurak, CEO of A.D.A.M.

You’ll be able to RSVP for the discussion board right here.

Robotics for Inspection & Upkeep

From December eighth by way of the ninth, the “Robotics for Inspection & Upkeep” convention, powered by ASME, will happen as a digital occasion. With a gap keynote about drone supply introduced by Kevin Wasik of UPS Flight Ahead, the convention, with a subheading of Bridging the Hole Between the Skilled and Asset, will embrace trade challenges and options, case research, interactive knowledgeable discussions, networking alternatives, and extra

“The Robotics for Inspection & Upkeep Summit brings collectively asset house owners, robotics & UAS inspection service suppliers, robotic upkeep suppliers, robotic and UAS OEMs, sensor OEMs, and information analytic/software program suppliers to share useful perception on the newest robotic and information analytics applied sciences to assist companies optimize inspection, upkeep, and restore whereas enhancing security and decreasing prices.”

You’ll be able to register for the digital convention right here.

TÜV SÜD Finishes Digital Coaching Course with AM Design Validation

In April, TÜV SÜD launched a digital coaching course, with two iterations every of eight totally different multi-day periods on subjects starting from AM fundamentals and threat evaluation to well being and security and trade requirements. This week, the corporate will end the course with “Design Validation in Additive Manufacturing,” this Wednesday, Thursday, and Friday, December 8-10, from 1 to five am EST. Specializing in find out how to design merchandise for additive manufacturing, the course will cowl subjects together with supplies in established AM applied sciences, manufacturing duties, a basic overview of designing elements for AM, approval and threat evaluation, and extra.

“Additive manufacturing allows engineers and designers to interrupt new floor in product improvement. Nevertheless, most firms don’t but have ample expertise on this area: Which design guidelines should a 3D printed product have? How can the set necessities be met and the half performance be assured? When is submit processing wanted and the way ought to the submit processing steps be carried out in AM?”

You’ll be able to register for the course right here.

2022 Metallic AM Predictions

As we get ever nearer to a brand new 12 months, we will’t give you a real glimpse into the long run, however we will inform you a few webinar by 3DEO on “Metallic AM Predictions for 2022” at 1 pm EST on December eighth. In the course of the intimate Q&A, led by the corporate’s President Matt Sand, trade knowledgeable Terry Wohlers, the Wohlers Associates Founder and Head of Additive Manufacturing Market Intelligence, will provide a have a look at 2021, and his predictions for metallic AM in 2022. Matters will even embrace modifications within the provide chain and new design and materials developments.

“We’ll discover alternatives in metallic 3D printing and the way it can positively affect the worldwide provide chain; assessment new advances in supplies and design developments; and take a holistic have a look at AM in 2022 – what to anticipate, and what to observe for.”

You’ll be able to register and submit questions for the webinar right here.

Riven Tackling Warp with New WAM Function

Additionally at 1 pm EST on the eighth, Riven, a pacesetter in 3D actuality intelligence for superior manufacturing, will current a webinar and stay demonstration of its latest function, WAM, which stands for Warp-Tailored Fashions, and never Wire Arc Manufacturing. After releasing its Re-Scaling Components AM function, the corporate took a deeper have a look at warp points, and is now saying the approaching launch of its new WAM software, which makes use of full-part 3D information from a warped half to seek out the corrections essential to print a brand new anti-warped mannequin that’s as much as ten occasions extra correct than the primary model. Attendees will get to listen to from Riven’s Founder and CTO James Web page about capturing the preliminary half with the Riven Propel Scanner, utilizing the up to date Riven Cloud to generate a CAD-Evaluate output, find out how to combine WAM into manufacturing and save prices, and extra.

“We are able to’t wait so that you can be part of us and our founding CTO to see a stay demonstration of how Riven’s Warp-Tailored Fashions will save iterations and finances throughout all kinds of additive manufacturing applied sciences.”

You’ll be able to register for the webinar right here, which will even get you entry to Riven’s full report on its Warp-Tailored Fashions.

America Makes Holding Ultimate City Corridor

America Makes is holding its final of three City Corridor Conferences for members at 2 pm EST on Wednesday, December eighth; the primary was held in October and the second in November. You’ll be able to submit questions on membership prematurely to [email protected], and after the conferences are over, a Membership FAQ will probably be developed and made accessible.

“America Makes is launching a sequence of three membership city halls to provide an outline of membership advantages, Portal instruments, and reply any questions you might have.”

You’ll be able to register for the ultimate Membership City Corridor session right here.

Metallurgical Ideas for PBF with ASTM

At 10 am EST on Thursday, December ninth, ASTM Worldwide’s Additive Manufacturing Heart of Excellence (AMCOE) will maintain a webinar on “Metallurgical Ideas for PBF Processes.” Speaker A.D. Rollett, Carnegie Mellon College, will focus on the microstructure evolution and physics behind the laser powder mattress fusion (PBF-LB) course of, hyperlinks between porosity and course of circumstances in defining a course of window, utilizing superior strategies like ultra-high pace imaging with dynamic x-ray radiography (DXR for course of characterization, and extra. Attendees will even hear an outline of the principle metallic AM applied sciences, like binder jetting and DED.

“3D printing of metals has superior quickly prior to now decade and is used throughout a variety of trade. Though laser powder mattress fusion (LPBF) has matured the quickest for metals, different applied sciences akin to binder jet and (robotic) wire feed are making substantial progress.  Many elements of the expertise are thought-about to be effectively understood within the sense that machines make elements and temperature histories with residual stress might be simulated. Nonetheless, key questions stay open as to find out how to qualify printers and certify elements, find out how to management defect buildings, which incorporates floor situation and find out how to implement extra subtle management methods.”

You’ll be able to register for the webinar, for $49, right here.

3D Techniques Begins Automotive Webinar Collection

In its first of two webinars on the ninth, 3D Techniques begins its Automotive Webinar Collection at 10:30 am EST with find out how to “Optimize Versatile Element Retention Earlier.” Aggressive stress for innovation is dashing up within the automotive trade, making AM functions for this sector fairly necessary. This primary webinar, that includes 3D Techniques audio system Kevin Baughey, Section Chief, Transportation & Motorsports, and Richard Broad, Utility Improvement Supervisor, will present attendees the way it’s potential to quickly design, check, and iterate advanced but efficient retention elements through the use of superior AM gear, complete software program options, new materials applied sciences, and loads of course of information.

“This webinar sequence with useful insights from our software specialists reveals you the way additive manufacturing (AM) turns into a pillar in your automotive improvement and manufacturing processes. Our consultative method to engineering and additive manufacturing expertise can provide the aggressive benefit it is advisable meet the challenges of nonstop innovation. Be a part of our workforce all through this sequence to find how one can enhance manufacturing productiveness, decrease prices, and develop new designs that optimize efficiency and create distinctive experiences in your prospects on demand.”

You’ll be able to register for the webinar right here, and maintain a watch out for extra episodes on this sequence coming in 2022.

3D Techniques: Increasing Biomaterial Palette 

The corporate’s second webinar on December ninth, at 11 am EST, will probably be a gathering with one of many main thought leaders in superior 3D bioprinting in “Increasing the Biomaterial Palette for Biofabrication: From Improvement to Commercialization.” Every month, Allevi by 3D Techniques is holding a digital dialogue in its Meet the Innovators sequence, and this one will probably be with Dr. Ramille Shah, Affiliate Professor of Bioengineering on the College of Illinois at Chicago and Co-Founder and Chief Scientific Officer of Dimension Inx.

“Our personal Vice President and Common Supervisor of Bioprinting, Taci Pereira, will facilitate a Q&A session in regards to the 3D bioprinting market, key insights, functions for the expertise, and future improvements. We’ll additionally ask Dr. Shah, who’s an inventor of over a dozen patents within the area and a famend entrepreneur, about her profession and imaginative and prescient for fulfillment. As all the time, we welcome you to submit questions throughout the session.”

You’ll be able to register for the stay dialogue right here.

Particulars on Sinterit’s NILS 480

Simply earlier than RAPID this fall, Sinterit introduced a brand new industrial SLS 3D printer, the NILS 480, which is impartial from its compact Lisa 3D printer line. The corporate held a launch webinar for the system in September, and is now holding a brand new version of the webinar, “NILS 480 in particulars,” at 12 pm EST on the ninth. Sinterit workforce members Robert Garbacz, Dominik Stasiak, and Maxime Polesello will focus on the options of the brand new printer, that includes a 200 x 200 x 330 mm construct dimension, together with its pace, value, automation choices, ROI, and far more.

“It will likely be the possibility to fulfill a totally new product line and focus on with the Sinterit workforce why NILS 480 is a game-changer for industrial SLS 3D printing.”

You’ll be able to register for the webinar right here.

HP and A3 on Finish-of-Arm Instruments

Lastly, the final webinar of the week will even be at 12 pm EST on Thursday the ninth, known as “Traits, Improvements and Applied sciences in Finish-of-Arm Instruments” by HP and A3 Affiliation for Advancing Automation. Attendees will find out about what’s at present happening within the EOAT market, the way it’s modified and tailored, present applied sciences, the long run for EOATs, and extra.

“Some of the thrilling elements of the robotics and automation motion is the tooling that does the heavy lifting: the Finish of Arm Software (EOAT). From a greenback perspective the top of arm software market is as huge because the robotic market and has lately seen an innovation renaissance with electronics, built-in sensing, smooth applied sciences and gear supply on the pace of Amazon.”

You’ll be able to register for the webinar right here.