SPH Engineering’s UgCS SkyHub {hardware} and the LightWare SF30/D | sUAS Information
3 mins read

SPH Engineering’s UgCS SkyHub {hardware} and the LightWare SF30/D | sUAS Information


SPH Engineering is a globally acknowledged supplier of UgCS – UAV mission planning and flight management software program answer. This continuously evolving software program is utilized by drone pilots {and professional} surveyors worldwide – significantly within the areas of environmental, archeological, engineering, mining, agricultural and organic surveys. The truth is, one side – UgCS academic program – goals to help universities with a protected and environment friendly instrument to check progressive concepts round surveying and inspections utilizing drones.

One other know-how from SPH Engineering, Drone Present Software program, is used to handle and coordinate the flight of dozens and even a whole lot of drones. A latest instance of Drone Present Software program  in use was the drone present on the US Tremendous Bowl 2022.

UgCS Built-in Techniques, yet one more enterprise line of SPH Engineering, permits the superior technological integration between a drone, numerous sensors, the UgCS SkyHub {hardware}, and the UgCS software program. The corporate has developed built-in programs for his or her purchasers, a few of which use nonstandard sensors like floor penetrating radars, magnetometers, metallic detectors, fuel detectors versus extra conventional LiDAR, or digicam.

 A problem to flight management programs

When flying a drone utilizing a UAV mission planning and flight management answer, all elements of the built-in system – RADAR or LiDAR – want to satisfy with the laws of the place the place the drone flight will happen. Today RADAR altimeters are prohibited from use in the USA and a part of the EU. This has meant that SPH Engineering has needed to discover different altimetry alternate options and their consideration has thus turned to LiDAR.

The primary requirement for an altimetry sensor is that they help the drone with sustaining a continuing altitude over the floor of water or the bottom. In some situations, the altitude might be very low requiring quick readings to offer the system and controller enough response time.

LiDAR as the answer

A number of years in the past, SPH Engineering examined a few of LightWare’s LiDAR sensors and as was typical of most LiDAR sensors of the time, the sensor had issues with efficient readings over reflective surfaces like water, snow and even in direct daylight.

Nonetheless, quick ahead a couple of years and the know-how and sensors have developed such that SPH Engineering is now ready to make use of the LightWare SF30/D LiDAR, over water, at a suitable flight altitude as much as 12 meters. That is glorious as the usual flying over altitude over water needs to be roughly 1.5 to 2 meters solely – so this LiDAR surpasses expectations!

Area trials and past

As of January 2022, SPH Engineering began integrating the SF30/D LiDAR sensor into their UgCS Built-in Techniques enterprise line. The product has already been delivered to dozens of their prospects for subject testing. Presently they await suggestions from subject trials, however the SPH Engineering workforce is hopeful and imagine they’re prone to see nice outcomes. Watch this house to listen to extra.

Leave a Reply

Your email address will not be published. Required fields are marked *